Faith Without Works A5 Journal UVDTF (J007)

Create a beautiful motivational mug, tumbler, glass cup, journal, or other hard-surface item with this easy-to-apply A5 UVDTF Transfer.

Perfect for crafters, small businesses, gift makers, and DIY projects. UVDTF transfers provide a vibrant, professional-looking design without a heat press or sublimation equipment.

⚠️ PLEASE NOTE: THIS LISTING IS FOR THE UVDTF TRANSFER ONLY.
The mug shown in the product photo is for display purposes only. No mug, cup, or other finished product is included.

What You Will Receive

1 A5 Journal UVDTF Transfer


How to Apply Your A5 Journal UVDTF Transfer

1. Clean the surface thoroughly with rubbing alcohol and allow it to completely dry.
2. Position the transfer on your item before removing the backing to make sure you have the placement you want.
3. Slowly peel away the white backing, leaving the design attached to the clear transfer film.
4. Carefully place the transfer onto your item. Once the adhesive touches the surface, repositioning may not be possible.
5. Starting from the center, press and smooth the design firmly toward the outer edges.
6. Use your fingers or a squeegee to rub firmly over the entire design. Pay special attention to small letters and details.
7. Slowly peel the clear film away at an angle.
8. If part of the design begins to lift, lay the film back down, rub firmly again, and slowly continue peeling.
9. After removing the film, press over the design again to make sure all edges are securely adhered.

TIP TO PREVENT BUBBLES: Apply the transfer slowly from one side to the other instead of placing the entire transfer onto the surface at once. Use a squeegee or felt-edge scraper to push out air as you apply.

What Can UVDTF Transfers Be Used On?

UVDTF transfers work best on clean, smooth, hard, non-porous surfaces, including ceramic mugs, glass tumblers, Libbey-style glass cans, acrylic cups, plastic tumblers, stainless-steel tumblers, notebooks/journals with smooth covers, water bottles, phone cases, containers, and other compatible craft blanks.

No heat press needed • No weeding • No epoxy • Peel, stick & enjoy!

UVDTF transfers are generally not recommended for fabric, clothing, highly textured surfaces, silicone, or flexible materials.

Care Instructions

For the longest-lasting results, hand washing is recommended. Avoid soaking, abrasive scrubbers, and extreme heat. Allow the transfer to adhere fully before washing. Do not microwave unless both your blank and transfer are specifically rated for microwave use.

Important Information

Because UVDTF transfers use a strong adhesive, they are intended for one-time application. Please measure and check placement before applying.

Actual colors may vary slightly due to screen/monitor settings.

Due to the nature of transfers, application errors are generally not considered product defects. Please follow the application instructions carefully.